R4i Dsi Ll 141 Firmware Download

R4i gold V2.0 Firmware below have been tested and work for Nintendo DSi XL,DSi LL, DSi, DSL and DS. Www.r4ids.com has been dead and if you want to.

Last Updated: 31/Oct/2010 Note: At this time WE DO NOT RECOMMEND PEOPLE BUY R4I SDHC CARDS – READ THIS PAGE FOR DETAILS. You can buy alternatives to the R4i SDHC card from any of the stores on our recommend page. R4i SDHC Nintendo 1.4.1 Update Compatibility When Nintendo released the 1.4.1U / 1.4.1E / 1.4.2C update back in September, almost all Nintendo DSi flash cards were unable to work on updated DSi consoles as well as any new DSi and DSi XL consoles they may have bought in a store.

Since then, various non-R4 (sad for us!) related cards have successfully worked with the new 1.4.1 / 1.4.2 firmware. In order, they are as follows. Cards that Work with Nintendo’s 1.4.1 / 1.4.2 Update • EZFlash Vi – for some reason, despite initial reports to the contrary, the EZFlash Vi card continued working throughout the Nintendo 1.4.1 / 1.4.2 update! All EZFlash Vi cards that were compatible with the 1.4 update (that was released in summer of 2009) will also be compatible with the new 1.4.1 / 1.4.2 patch. • Acekard 2i – The Acekard team were the first to update their card to be working with the 1.4.1 / 1.4.2 firmware.

The update involves placing certain files on the Micro-SD card. The user then needs to use a DS Lite or a pre-1.4.1 DSi to run the file (and not switch the DS off during the process, or it will damage the card!). When patching is complete, the Acekard 2i will work on the new Nintendo firmware. • Supercard DSTWO – Not many vendors stock the Supercard DSTWO at the moment. It is an advanced card but marred with a slight reliability problem. Some stores have already • M3i Zero – The user does not need a DS console to flash the M3i. You simply need to insert the new F_core file (which is part of the software download on the M3i Zero official website, or can be downloaded from the stores recommended on our Where to Buy page) into your Micro-SD card, and plug your M3i Zero via the cable supplied with the box into a USB port on your computer.

The red light on the back of the M3i Zero should begin flashing, and about thirty seconds later the light will stop flashing, indicating that the M3i Zero is ready to use. • iEDGE – updated with new firmware just before Christmas, the iEDGE card now works fully with 1.4.1 • Supercard DSTWO – still rather expensive but works also with all 1.4.1E / 1.4.1U updates. For news about all that are not R4 or R4i cards (which is this site’s specialty), you can visit our sister site at Special note with the M3i Zero: If a solid red light appears when you first plug it in, unplug it, check to make sure the correct files are on the Micro-SD card, then plug it in again. It should work if plugged in correctly a second time. If it still fails to flash after repeated attempts, there may be a problem – but usually within three it’s fine. A solid red light will NOT damage an M3i Zero that isn’t already broken, because it simply means “nothing is happening, check me”.

Not sure how difficult it is to remove. Serial number lookup. Please view pictures carefully before buying.

It is simply an indicator. That said, do NOT unplug your M3i Zero under any circumstances while the red light is flashing as that DOES risk damage. R4i SDHC Produces New Card The R4i team has taken a different approach to the Nintendo 1.4.1 / 1.4.2 problem. They have produced a brand new iteration of their card that is 1.4.1 compatible – and the way to tell them apart is quite easy.